Axon Body 3 Camera User Guide
Axon Enterprise, Inc. Page 7 of 26
Triad LED – In the field, can show the camera’s operating mode. In an Axon Dock, displays
camera status and battery capacity.
Program – Used in conjunction with Event to activate pairing.
In the field, the Triad LED on the front of the camera can be configured to display the
camera’s operating mode.
Operating Mode Triad LED
Ready (Buffering) Blinking green
Recording Blinking red
In the Axon Dock, the Triad LED on the front of the camera shows the device status and
battery capacity. See the camera display for additional information.
Device Status Triad LED
Battery is fully charged (90% or more) Solid green
Battery capacity is at mid-range (11% to 89%) Solid yellow
Battery capacity is at low-range (10% or less) Solid red
Uploading data, downloading data, or applying
device settings
Spinning yellow (cycling yellow on each Triad
LED)
Applying a firmware update Spinning white (cycling white on each Triad LED)
Possible network error. Refer to Troubleshooting
section of the Axon Body 3 User Manual or go to
my.axon.com.
Blinking red and green
Device error. Refer to device page in Axon
Evidence.
Blinking red
Axon Body 3 Camera top
Operation LED – Shows information about the camera’s current operating mode.
Camera Display – Shows information on camera status and activity. Different information is
shown when the Axon Body 3 camera is in the field and in an Axon Dock. Note that some
icons may not be active or displayed at your agency. The display is divided into a Status Bar
and Activity Area.
Power
Operation LED
Camera Display
Status Bar
Activity Area
To Next Page
Loading...
Need help?
General
