Axon AX1025 User Guide

Axon Body 3 Camera User Guide
Axon Enterprise, Inc. Page 18 of 26
Notifications
The Axon Body 3 camera emits sounds called audio prompts to notify you of device status.
The audio prompts are accompanied by a vibration that matches the audio. These prompts
usually occur after you perform an action with the body camera.
Operating Mode or Action Audio Notification Haptic Notification
(vibration)
Power on Two short rising-pitch tones One - long duration
Power off
Three short lowering-pitch
tones
One - long duration
Start recording Two short tones Two - short duration
Recording reminder
Two short tones every two
minutes
Two - short duration every 2
minutes
Stop recording, return to Ready
mode
One long tone One - long duration
Volume up or down One short tone at new volume
level
One – short duration
Axon Respond Livestreaming
connected
Three short rising-pitch tones One – long duration
Enter or Exit Mute mode
(microphone off)
One short tone Two - long duration
Exit Stealth mode None two - short duration
Event marker captured None One - short duration
Enter or Exit Sleep mode One short tone One – long duration
Low battery notifications at
10% and 5% battery capacity.
Four quick high-pitch tones Four - short duration
Camera enters Pairing mode Three short rising-pitch tones None
LED status
Operation LED
The operation LED shows information about the camera’s current operating mode.
Operating Mode Operation LED
Recording Blinking red
Ready (Buffering) Blinking green
Booting up/powering down Solid red
Mute enabled or Pairing mode Blinking blue
Axon Respond Livestreaming (may not be
enabled at your agency)
Blinking purple
Low battery or error Blinking yellow
In a dock (no other action) Battery capacity color
Firmware update (while in an Axon Dock) Solid white

Axon AX1025 Specifications

General

Brand	Axon
Model	AX1025
Category	Digital Camera
Language	English