Barco Coronis 3MP LED User Manual

3. Display installation
3.4 Conn ecting the sign al cables
CAUTION: Only connect one of the two video links. Connecting both inputs simultane-
ously will result in driver errors.
To connect the signal cables to the display:
To get access to the connectors, remove the connector compartment cover. See "Removing the connector
compartment cover", page 10.
You may connect the display to a display controller by using the DVI or the DP connection. The input
selection of the device is automatically done. By default, the DisplayPort input has priority over the DVI
input. This can be changed in the OSD menu.
1. Connect the DVI or DP of the display controller to the DVI or DP connector of the display.
2. If you want to make use of the display’s USB upstream connector, connect a PC USB downstream
connector to the display’s USB upstream connector.
3. If you have chosen to use the display’s USB downstream connector, connect a USB device to the
downstream connector.
4. Connect the supplied external DC power supply to the +24 Vdc power input of the display.
K5902060 CORONIS 3MP LED DISPLAY 01/10/2015
11

Barco Coronis 3MP LED Specifications

General

Brand	Barco
Model	Coronis 3MP LED
Category	Monitor
Language	English