Barco Coronis 3MP LED User Manual

3. Display installation
5. Plug the mains connector of the external DC power supply to a grounded power outlet by means of
one of the supplied power cables.
3.5 Routing the cables & Reattach the connec tor compartment
cover
To route the cables
1. Route all connected cables through the cable routing channel in the stand of your display.
Tip: The cable straps at the inside of the connector compartment allow you to fix the cables for better
shielding of the cables.
To Reattach the connector compartment cover
1. Reattach the connector compartment cover by sliding the cover’s bottom in position and then push the
cover’s top. You’ll hear a “click” sound of the cover’s clips when the connector compartment cover is
in position.
12
K5902060 CORONIS 3MP LED DISPLAY 01/10/2015

Barco Coronis 3MP LED Specifications

General

Brand	Barco
Model	Coronis 3MP LED
Category	Monitor
Language	English