EasyManuals Logo
Home>Barco>Monitor>Coronis 3MP LED

Barco Coronis 3MP LED User Manual

Barco Coronis 3MP LED
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
8. Important information
To fully disengage the power to the device, please disconnect the power cord from the AC inlet.
Power cords:
Utilize a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 250 V
min., provided with a hospital-grade type plug 5-15P conguration for 120V application, or 6-15P for
240V application.
Do not overload wall outlets and extension cords as this may result in re or electric shock.
Mains lead protection (U.S.: Power cord): Power cords should be routed so that they are not likely to
be walked upon or pinched by items placed upon or against them, paying particular attention to cords
at plugs and receptacles.
Use a power cord that matches the voltage of the power outlet, which has been approved and complies
with the safety standard of your particular country.
Water and moisture
Never expose the display to rain or moisture.
Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry
tuborinawetbasement.
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device in a
cupboard or another enclosed location, heed the necessary space between the set and the sides of the
cupboard.
Installation
Place the device on a at, solid and stable surface that can support the weight of at least 3 devices. If you
use an unstable cart or stand, the device may fall, causing serious injury to a child or adult, and serious
damage to the device.
This apparatus conforms to:
CE0120 (MDD 93/42/EEC; A1:2007/47/EC class IIb product), CE - 2004/108/EC, CE - 93/42/EEC;
A1:2007/47/EC class II b, IEC 60950-1:2005 + A1:2009 (2ND EDITION), IEC 60601-1:2005 + A1:2012,
ANSI/AAMI ES 60601-1:2005 + C1:2009 + A1:2012, CAN/CSAC22.2 No. 60601-1-08:2008, DEMKO -
EN 60601-1:2006, EN 60601-1-2:2007, CCC - GB9254-2008 +
GB4943.1-2011 + GB17625.1-2003, KC,
VCCI, FCC class B, ICES-001 Level B, FDA 510(k), RoHS
National Scandinavian Deviations for CL. 1.7.2:
Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan"
Norway: "Apparatet tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"
8.2 Env ironmenta l information
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that, under the European Directive 2012/19/EU governing
waste from electrical and electronic equipment, this product must not be disposed of with other municipal
waste. Please dispose of your waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. To prevent possible harm to the environment or
40
K5902060 CORONIS 3MP LED DISPLAY 01/10/2015

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Barco Coronis 3MP LED and is the answer not in the manual?

Barco Coronis 3MP LED Specifications

General IconGeneral
BrandBarco
ModelCoronis 3MP LED
CategoryMonitor
LanguageEnglish

Related product manuals