R5911227 /02 Coronis Fusion 4MP / 6MP22
4.1 OSD menu language
About the OSD menu language
By default, the OSD menu comes up in English. However, there’s a wide range of other languages available
for the OSD menu of your Coronis Fusion 4MP / 6MP.
To change the language of the OSD menu:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > User Interface > Menu menu.
3. Enter the Language submenu.
4. Select one of the available languages and confirm.
4.2 OSD menu orientation
About orientation
Your display can be mounted in landscape or portrait position. The OSD menu allows to adjust the orientation
to landscape or portrait / inverse portrait.
To adjust the orientation
1. Bring up the OSD main menu.
2. Navigate to the Configuration > User Interface > Menu menu.
3. Enter the Orientation submenu.
4. Select Landscape/Portrait/Inverse Portrait as desired and confirm.
4.3 OSD menu automatic close function
About the OSD menu automatic close function
By default, the OSD menu will disappear automatically after approximately 90 seconds of inactivity. However,
this function can be disabled so that the OSD menu remains on the screen until manually closed.
To enable/disable the OSD menu automatic close function:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > User Interface > Menu menu.
3. Enter the Automatic Close submenu.
4. Select Enabled/Disabled as desired and confirm.
4.4 Power lock function
About the power lock function
By enabling the power lock function, standby switching is disabled (refer to “Standby switching”, page 19 for
more info). It will no longer be possible to switch off your display via the jog dial. DPMS mode is not affected by
this setting.
To enable/disable the power lock function:
1. Bring up the OSD main menu.
Advanced operation
To Next Page
Loading...
Need help?
General