R5911227 /02 Coronis Fusion 4MP / 6MP 25
4.9 Luminance target
About the luminance target
The luminance target of your Coronis Fusion 4MP / 6MP is adjustable over a predefined range. When you
change the luminance target, the display will adjust its backlight to reach the target.
To set the luminance target:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration menu.
3. Enter the Luminance Target submenu.
4. Set a luminance target value as desired and confirm.
The default, factory DICOM calibrated luminance value is available in the technical specifications
table. The guaranteed backlight lifetime is valid for this setting.
4.10 Color presets
About color presets
The available color preset settings for your display are:
• Clearbase: Simulation of the clearbase film color temperature
• Bluebase: Simulation of the bluebase film color temperature
• User: When selecting the User color temperature setting, you will be able to manually define:
- Color temperature (Kelvin)
- Color coordinates (x, y)
• 6500K: Corresponds to a color temperature of 6500 Kelvin (D65)
• Native White: The native, unmodified color temperature of the LCD panel
To select a color preset:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Color Presets submenu.
4. Select one of the available color presets and confirm.
4.10.1 Color temperature
About color temperature:
It is possible to change the color temperature of your display.
Color temperature can only be changed on your display when Color Presets is set to User.
To change the color temperature:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings > Color Presets menu.
3. Select User and confirm.
4. Enter the Color Definition submenu, select Color Temperature and confirm.
5. Enter the Color Temperature submenu, set the value as desired and confirm.
Advanced operation
To Next Page
Loading...
Need help?
General