R5911227 /02 Coronis Fusion 4MP / 6MP26
4.10.2 Color coordinates
About color coordinates:
It is possible to change the color coordinates of your display.
Color coordinates can only be changed on your display when Color Presets is set to User.
To change the color coordinates:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings > Color Presets menu.
3. Select User and confirm.
4. Enter the Color Definition submenu, select Color Coordinates and confirm.
5. Enter the x and y submenus, set the values as desired and confirm.
4.11 Color space
About color space
The available color space settings for your display are:
• sRGB (standard Red Green Blue): To match typical home and office viewing conditions. Note: This
setting does not fully set your display to the sRGB color space. Refer to “sRGB”, page 27 to do this.
• Native: The native, unmodified color space of the LCD panel.
• PrePriAS (Preserve Primaries And Secondaries): To change the white (color) point without reducing
red, green and blue colors.
To select a color space:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration menu.
3. Enter the Color Space submenu.
4. Select one of the available color space settings and confirm.
4.12 Viewing modes
About viewing modes
The Coronis Fusion 4MP / 6MP can be used in 2 viewing modes:
• Diagnostic: This mode provides the full calibrated luminance and is intended for using the display for
diagnostic purposes.
• Text: In this mode, the luminance is reduced to approximately half of the luminance. This is intended for
using the display with office applications such as word processing.
Please note that text mode is not persistent, once powered off, the unit will restart in diagnostic mode.
The diagnostic mode should always be selected when the Coronis Fusion 4MP / 6MP is intended to
be used in a diagnostic environment.
To select a viewing mode:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration menu.
3. Enter the Viewing Mode submenu.
4. Select Diagnostic/Text as desired and confirm.
Advanced operation
To Next Page
Loading...
Need help?
General