60
AXES NOT SCORING
Camera
A5CM29000
The axe scoring is accomplished by using
a 3D camera which is located behind the front
console.
It keys off the green color of the axe head.
Gently clean the lens of the camera.
If the scoring is off, the adjustment is located
inside the menu system.
The camera itself can not be adjusted!
Refer to the Autocalibration instructions on page 35.
It will explain how to “move” the frame to match the hatchet position.
During the boot up process, there will be a few seconds that the camera image will show on the
monitor. It will show the green axes against the far wall.
Actual Game Picture
Image shown on monitor at power on.
Camera Blocked Error :
This camera blocked message will show on the screen
when the game thinks the camera is blocked.
Ensure camera path is not blocked.
If the motherboard does not see the camera at all:
- The game may start, but will continue to wait for axes to be thrown.
- The image normally shown at power on, will not show.
- The keyboard shortcut Alt + Tab will not do anything.
1.) Check the 2 USB cables to the motherboard. Part # A5CE6602 and the USB that comes with the
camera.
2.) Replace the camera. Part # A5CM29000
Note: This screen can also be
brought up during game play
by installing a keyboard to the
motherboard and pressing Alt
and Tab at the same time.
To Next Page
Loading...
Need help?
General
