66
HOW TO REPLACE MONITOR
Carefully climb inside the game and remove the 6 screws from the front
of the monitor housing using a #2 square bit.
Using 2 people, bring the monitor housing down from the top of the
game and to a work bench.
We want to remove the rear wood panel - the monitor will come out
with the wood.
Remove the screws from the back edge of the top black plastic of
the monitor housing using a #2 square bit.
Remove only 6 screws from the back edge of the monitor
housing using a #2 square bit.
Remove the 6 screws from the bottom edge of the monitor
housing using a #2 square bit.
The back wood panel can now be removed - the monitor will come out
attached to the back wood panel.
The monitor can now be removed from the wood
supports and replaced.
It is best to bring the monitor housing
down from the top of the game to
replace the monitor while working on a
bench.
Unplug the game from the wall.
Remove the monitor housing from the
cabinet by removing the 2 bolts/washers/
split washers from the wood into the
monitor housing.
Unplug the power cord
from the power cord from
monitor housing.
Unplug the HDMI cable
from the HDMI cable from
monitor housing.
To Next Page
Loading...
Need help?
General
