60
MATRIX SERVSWITCH™
Profile
Use this field to assign users to “user profiles,” which are definitions of how users
can access the Matrix ServSwitch system. Profiles are configured on the Configure
Profile page (see Section 4.6).
The factory-default profile for each user is the profile appearing in the same-
numbered row in the “Configure Profile” page (see Section 4.6); that is, the first
user is assigned the profile in the first row in the “Configure Profile” page
(“Profil 1” initially), the second user is assigned the profile in the second row in the
“Configure Profile” page (“Profil 2” initially), and so on. If you go into the
“Configure Profile” page and change the name of any profile assigned to a user—
whether it’s one of the defaults that’s still in effect, or a different profile you’ve
manually assigned that’s listed in some other row—the profile name appearing in
this Profile field will be automatically updated, but only after you save the
configuration and exit and re-enter the configuration menu.
4.6 Configuring User Profiles
You can use the “Configure Profile” page to assign security procedures, access
levels, and CPU-connection type to users.
Figure 4-7. The “Configure Profile” page.
Configure profile
Profile name, up to 8 characters
Name Access Connect Share Scan Logout
Profil 1 Group 1 Share 2 5 240
Profil 2 Group 1 Share 2 5 240
Profil 3 Group 1 Share 2 5 240
Profil 4 Group 1 Share 2 5 240
Profil 5 Group 1 Share 2 5 240
Profil 6 Group 1 Share 2 5 240
Profil 7 Group 1 Share 2 5 240
Profil 8 Group 1 Share 2 5 240
Profil 9 Group 1 Share 2 5 240
Profil10 Group10 Share 2 5 240
Profil11 Group10 Share 2 5 240
Profil12 Group10 Share 2 5 240
Profil13 Group10 Share 2 5 240
Profil14 Group10 Share 2 5 240
Profil15 Group10 Share 2 5 240
Profil16 Group10 Share 2 5 240
Profil 1
To Next Page
Loading...
Need help?
General