BLUM ZX-Speed User Manual

Notesconcerningmeasuringsequence
322000010S|V1B|07/2017
20
©byBlum‐Novotest
6. Notesconcerningmeasuringsequence
NOTICE
Damagetothemeasuringsystemduetocollisionispossible.
 Limitthemeasuringblockovertravelbyprogramming,(seeTab.6‐1).
Tab.6‐1
NOTICE
Measuringerrorispossible.
 Observemax.feedrateofthemachinemanufacturer.
 Executecalibrationandtoolmeasurementatthesameconstantfeedrate.
Probecontact XY: <4.5mm
Z: <5mm

BLUM ZX-Speed Specifications

General

Brand	BLUM
Model	ZX-Speed
Category	Measuring Instruments
Language	English