BMC G3 LAB User Manual

BPAP Series User Manual V1.0
9 / 58
7. Glossary
Apnea
A condition marked by the cessation of spontaneous breathing.
AutoCPAP
Adjust CPAP pressure automatically to improve patient comfort based on monitoring of sleep
events, such as apnea, hypopnea etc.
Auto Off
When this feature is enabled, the device automatically discontinues therapy whenever the
mask is removed.
Auto On
With this feature, the device automatically initiates therapy when you breathe into the mask.
This feature is always enabled.
SmartC
With this feature, the device adjusts Treat P according to the patient's respiratory event
during a certain time.
SmartA
With this feature, the device adjusts Ramp P and Min APAP according to the patient's
respiratory event during a certain time.
SmartB
With this feature, the device adjusts Ramp P and Min APAP according to the patient's
respiratory event during a certain time.
ASV
Under S/T mode, ASV function can be set to be ASV, ASV Auto and Off. If this function is set
to be ASV, the device will predict the minute ventilation according to the real-time collected
air flow data, and adjust the IPAP according to the minute ventilation.
ASV Auto
Under S/T mode, ASV function can be set to be ASV, ASV Auto and Off. If this function is set
to be ASV Auto, while achieving the ASV function, the respiratory events will be judged and
the EPAP will be adjusted according to the respiratory events.
CPAP
Continuous Positive Airway Pressure.
EPAP
Expiratory Positive Airway Pressure.
IPAP
Inspiratory Positive Airway Pressure.

BMC G3 LAB Specifications

General

Brand	BMC
Model	G3 LAB
Category	Oxygen Equipment
Language	English