To Next Page

To Previous Page

BPAP Series User Manual V1.0

46 / 58

CAUTION!

• It is recommended to clean the tubing once a week.

18.7 Replacing the Air Filter / PM2.5 Filter

(1) Attach the air filter to the filter cap, as shown in Fig. 18-4.

Filter Cap

Air Filter

Fig. 18-4

(2) Install the filter cap containing the air filter to the device, as shown in Fig. 18-5.

Fig. 18-5

(3) Change the air filter and filter cap to the PM2.5 filter, as shown in Fig. 18-6.

PM2.5 Filter

Fig. 18-6

CAUTIONS!

• To avoid material damage, do not place the spare air filter / PM2.5 Filter in direct sunlight,

humid environments, or temperatures below the freezing point. The air filter / PM2.5 Filter

should be replaced every 6 months (It may be replaced more frequently based on actual

sanitary conditions).

• Operating the device with a dirty air filter may stop it from working properly and may cause

damage to the device.

Other manuals for BMC G3 LAB

Questions and Answers:

Need help?

Do you have a question about the BMC G3 LAB and is the answer not in the manual?

General