BMC G3 LAB User Manual

BPAP Series User Manual V1.0
23 / 58
13. Heated Humidifier
The humidifier is available from your home care provider. The humidifier may reduce nasal
dryness and irritation by adding moisture (and heat if applicable) to the airflow.
13.1 Filling the Water Chamber
13.1.1 Removing the Water Chamber
Press down the water chamber, and then remove it, as shown in Fig. 13-1.
Fig. 13-1
WARNING!
• Turn the device off and allow approximately 15 minutes for the heater plate and water to
cool.
13.1.2 Filling Water
(1) Open the cap, as shown in Fig. 13-2, and fill the water chamber with approximately 360
ml of water, as shown in Fig. 13-3. Make sure that the water does not exceed the maximum
water level line.
Fig. 13-2
Fig. 13-3

BMC G3 LAB Specifications

General

Brand	BMC
Model	G3 LAB
Category	Oxygen Equipment
Language	English