BMC G3 LAB User Manual

BPAP Series User Manual V1.0
24 / 58
(2) Open the cap, and fill the water chamber with approximately 360 ml of water, as shown
in Fig. 13-4. Make sure that the water does not exceed the maximum water level line.
Fig. 13-4
WARNING!
• Change water before every use and do not surpass the MAX fill line.
CAUTIONS!
• Empty the water chamber when the heated humidifier is not in use.
• Distilled water is recommended.
IMPORTANT TIP!
• It is not necessary that remove the water chamber from the device. The users can open
the cap of the water chamber directly to fill the water.
13.1.3 Returning the Water Chamber
Close the cap after it is filled with water, as shown in Fig. 13-5, and return it to the device, as
shown in Fig. 13-6.
Fig. 13-5
Fig. 13-6

BMC G3 LAB Specifications

General

Brand	BMC
Model	G3 LAB
Category	Oxygen Equipment
Language	English