EasyManuals Logo

BMW 2011 R 1200 GS User Manual

BMW 2011 R 1200 GS
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Do not touch hot parts of the
exhaust system.
Remove bolts 1 of rear wheel,
holding wheel as you do so.
Roll rear wheel out toward rear.
Installing rear wheel
Malfunctions may occur
during control interventions
by ABS and ASC if a wheel other
than the standard wheel is in-
stalled.
Please see the information on
the effect of wheel sizes on the
chassis control systems ABS
and ASC at the beginning of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Place rear wheel on rear wheel
support.
The lengths of the lug bolts
used with cast wheels and
wire wheels vary. Mixing up sets
of lug bolts or using the wrong
lug bolts would mean that the
rear wheel would not be correctly
secured and this, in turn, could
result in an accident.
Use only wheel studs with the
same permitted length code
numbers. Do not lubricate the
lug bolts.
Install wheel studs 1 with spec-
ified torque.
Rear wheel on wheel
carrier
Tightening sequence: diago-
nally
44 lb/ft (60 Nm)
with cross-spoke wheels
OE
Tightening sequence: diago-
nally
44 lb/ft (60 Nm)
Front wheel stand
Mounting front wheel
stand
The BMW Motorrad front
wheel stand is not designed
for holding motorcycles without a
center or other auxiliary stands. A
motorcycle standing on the front
8
110
z
Maintenance

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW 2011 R 1200 GS and is the answer not in the manual?

BMW 2011 R 1200 GS Specifications

General IconGeneral
Displacement1170 cc
Bore x Stroke101 mm x 73 mm
Power110 hp (81 kW) at 7, 750 rpm
Compression Ratio12.0:1
Fuel SystemElectronic fuel injection
Final DriveShaft drive
ABSStandard
Front Tire110/80 R19
Rear Tire150/70 R17
Dry Weight203 kg
Weight, ready to ride, fully fueled229 kg
Engine TypeAir/oil-cooled flat twin ('Boxer')
Torque120 Nm at 6, 000 rpm
Fuel TypeUnleaded premium
Transmission6-speed
FrameTwo-section frame consisting of front and rear sections
Front SuspensionTelelever
Rear SuspensionParalever
Front BrakeDual disc
Rear BrakeSingle disc
Seat Height850 mm
Wheelbase1507 mm
Fuel Capacity20.0 l

Related product manuals