BMW 2011 R 1200 GS User Manual

BMW Motorrad Integral
ABS
with BMW Motorrad Integral
ABS II
OE
Switch off ABS function
Stop motorcycle or switch on
ignition with motorcycle sta-
tionary.
Press and hold button 1 until
ABS warning light changes its
display behavior.
with Automatic Stability Con-
trol
OE
First the ASC symbol changes
its display behavior. Press
and hold button 1 until ABS
warning light reacts. In this
case, the ASC setting does
not change.
The ABS warning light
lights up.
Release button 1 within two
seconds.
The ABS warning light con-
tinues to light up.
ABS function is deactivated,
integral function continues to
be active.
Behavior with ABS
deactivated
With the ABS function switched
off, first only the control on the
front wheel is deactivated. If the
motorcycle is then only braked
with the handbrake lever, ABS
regulation continues to be active
for the rear wheel also braked via
the integral function. The ABS
regulation for the rear wheel is
not switched off until the foot-
brake lever is actuated.
Switching on ABS
function
Press and hold button 1 until
ABS warning light changes its
display behavior.
The ABS warning light
goes out; if self-diagnosis
has not been completed, it be-
gins to flash.
4
49
z Operation

BMW 2011 R 1200 GS Specifications

General

Displacement	1170 cc
Bore x Stroke	101 mm x 73 mm
Power	110 hp (81 kW) at 7, 750 rpm
Compression Ratio	12.0:1
Fuel System	Electronic fuel injection
Final Drive	Shaft drive
ABS	Standard
Front Tire	110/80 R19
Rear Tire	150/70 R17
Dry Weight	203 kg
Weight, ready to ride, fully fueled	229 kg
Engine Type	Air/oil-cooled flat twin ('Boxer')
Torque	120 Nm at 6, 000 rpm
Fuel Type	Unleaded premium
Transmission	6-speed
Frame	Two-section frame consisting of front and rear sections
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brake	Dual disc
Rear Brake	Single disc
Seat Height	850 mm
Wheelbase	1507 mm
Fuel Capacity	20.0 l