BMW G 650 XCOUNTRY Rider's Manual

Information
The 'Maintenance' chapter de-
scribes work involving the check-
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Information on additional mainte-
nance and repair work is provid-
ed in the Repair Manual for your
motorcycle on DVD/CD-ROM
(RepROM), which you can ob-
tain from your authorized BMW
Motorrad retailer.
Special tools and a thorough
knowledge of motorcycles are
required to carry out some of the
work described here. If you are
in doubt, consult a certified work-
shop, preferably your authorized
BMW Motorrad retailer.
Onboard toolkit
Standard onboard toolkit
1 Fuse clip
Replacing fuses
2 Open-ended wrench, 8/10
mm
Adjusting chain tension
3 Open-ended wrench, 19
mm
Adjusting mirror arm
4 Open-ended wrench, 19
mm
Adjusting mirror arm
5 Screwdriver handle
Screwdriver handle 9
6 3 mm socket-head
Replacing headlight bulb
7 4 mm socket-head
Removing and installing body
panels
8 6 mm socket-head
Adjusting headlight height
8
60
z Maintenance

BMW G 650 XCOUNTRY Specifications

General

Engine Type	Single-cylinder, four-stroke
Displacement	652 cc
Max Torque	60 Nm (44 lb-ft) at 5, 250 rpm
Transmission	5-speed
Fuel System	Electronic fuel injection
Front Suspension	45 mm telescopic fork
Max Power	53 hp (39 kW) at 7, 000 rpm
Fuel Capacity	9.5 liters
Seat Height	840 mm
Front Brakes	Single 300 mm disc, 2-piston caliper
Rear Brakes	Single 240 mm disc with single-piston caliper
Dry Weight	148 kg