BMW G 650 XCOUNTRY Rider's Manual

Chain sag
1...1.2 in (25...30 mm) (Mo-
torcycle standing on side
stand)
1.2...1.4 in (30...35 mm)
(Rear wheel rebounded)
If the measured value is outside
the permissible tolerance:
Adjusting chain tension ( 70)
Adjusting chain tension
Make sure ground is level and
firm and park motorcycle.
Loosen quick-release axle
nut 1.
Loosen lock nuts 2 on left and
right by turning counterclock-
wise.
Adjust chain tension with ad-
justing screws 3 on left and
right.
Turning clockwise: chain ten-
sion is reduced.
Turning counterclockwise:
chain tension is increased.
Checking chain tension ( 69)
Make sure that the same scale
value 4 is set on the left and
right.
Tighten lock nuts 2 on left and
right by turning clockwise.
Locknut of drive-chain
tensioning screw
18 lb/ft (25 Nm)
Tighten quick-release axle
nut 1 with specified torque.
Nut on rear quick-release
axle
59 lb/ft (80 Nm)
Checking chain wear
Make sure ground is level and
firm and park motorcycle.
8
70
z Maintenance

BMW G 650 XCOUNTRY Specifications

General

Engine Type	Single-cylinder, four-stroke
Displacement	652 cc
Max Torque	60 Nm (44 lb-ft) at 5, 250 rpm
Transmission	5-speed
Fuel System	Electronic fuel injection
Front Suspension	45 mm telescopic fork
Max Power	53 hp (39 kW) at 7, 000 rpm
Fuel Capacity	9.5 liters
Seat Height	840 mm
Front Brakes	Single 300 mm disc, 2-piston caliper
Rear Brakes	Single 240 mm disc with single-piston caliper
Dry Weight	148 kg