Removing right fairing side
panel ( 91)
Pull defective fuse out of fuse
box as shown in assignment
diagram.
If the fuses are frequently
defective, have the electri-
cal system checked by a special-
ized workshop, preferably an au-
thorized BMW Motorrad retailer.
ABS fuse assignment
OE
1 ABS (30 A)
2 Spare fuse (30 A)
3 Spare fuse (20 A)
4 ABS (20 A)
Installing ABS fuse
Replace defective fuse with
fuse with required amperage.
Installing right fairing side panel
( 92)
Lamps
Information
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.
Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.
The bulb is pressurized and
can cause injury if dam-
aged.
Wear eye and hand protection
when replacing bulbs.
An overview of the bulb
types installed in your mo-
torcycle is provided in the chap-
ter "Technical Data".
Do not touch the glass of
new bulbs with your fin-
gers. For installation, use a clean,
dry cloth. Dirt deposits, in par-
ticular oil and grease, interfere
with heat radiation from the bulb.
Overheating and therefore short
service life of the bulbs are the
consequence.
Removing headlight
housing
Make sure ground is level and
firm and park motorcycle.
8
81
z
Maintenance
To Next Page
Loading...
Need help?
General
