34.13
Removing and installing front brake
disc
•
Remove front wheel.
•
Remove/install brake disc.
•
Degrease brake discs before installing.
L Note:
Installed direction (arrow) of brake discs must be
correct.
X Tightening torque:
Brake disc to front wheel
[RS/RT]........................................................ 21 Nm
[GS] (clean thread + Loctite 243).................. 24 Nm
[R] Cast alloy front wheel ............................. 21 Nm
(R) Spoked front wheel
(clean thread + Loctite 243).......................... 24 Nm
e Caution:
Check/adjust sensor gap; if exchanged, apply a new
sensor gap measuring mark.
Sensor gap:.. 0.45...0.55 mm (0.0177...0.02165 in)
RS340080
RS
To Next Page
Loading...
Need help?
General
