BMW R 1100 RT User Manual

34.20
[RS] Removing and installing rear
ABS sensor
•
Remove brake caliper but do not detach brake
line.
•
Using Torx T 25, detach sensor (1).
•
Separate the plug connector (2) in the sensor
line.
•
Install in the reverse order of work.
e Caution:
Check sensor gap and adjust if necessary with
spacer plates (3).
Run the sensor line correctly.
Sensor gap:.. 0.45...0.55 mm (0.0177...0.02165 in)
X Tightening torque:
Sensor ...........................................handtight, 4 Nm
1
3
2
RS340170

BMW R 1100 RT Specifications

General

Brand	BMW
Model	R 1100 RT
Category	Motorcycle
Language	English