BMW R 1100 RT User Manual

36.9
•
Heat bearing seat.
•
First insert wide bearing using drift,
BMW No. 36 5 511, and handle,
BMW No. 00 5 500.
•
Clamp arbor, BMW No. 36 5 511, in vise and
place wheel on it with wide bearing (2) in contact
with arbor.
•
Install spacer tube (1).
•
Bearing seat temperature 80 °C.
•
Insert narrow bearing (3) with drift,
BMW No. 36 5 512, and handle,
BMW No.005500.
•
Install retaining ring and driver.
•
Drive in shaft sealing ring with drift,
BMW No.365500, and handle,
BMW No.005500.
j
80
RS360025
00 5 500
36 5 511
RS360026
00 5 500
36 5 511
1
2
3
00 5 512
RS360028
00 5 500
36 5 500
RS360027

BMW R 1100 RT Specifications

General

Displacement	1085 cc
Bore x Stroke	99 mm x 70.5 mm
Power	66 kW (90 hp) at 7, 250 rpm
Torque	95 Nm at 5, 500 rpm
Transmission	5-speed
Final Drive	Shaft drive
Engine Type	Air/oil-cooled flat twin (boxer)
Front Suspension	Telelever with central spring strut
Rear Suspension	BMW Motorrad Paralever
Front Brakes	Dual disc, 305 mm
Rear Brakes	Single disc, 2-piston caliper
Fuel Capacity	25 liters
Seat Height	805 / 825 mm (adjustable)
Wheelbase	1485 mm