2 Safety instructions
2.1 About this product
Observe the general safety notes in this chapter and the safety instructions in
this documentation. Therewith, you avoid personal danger, damage and er‐
rors.
This operating instruction must be stored and transferred in case
of sale during the complete product lifetime.
2.2 Intended use
Prerequisites for proper and safe use of the energy storage devices are prop‐
er transport, appropriate storage, proper assembly and connection, careful
maintenance, operation and overhaul.
The energy storage device have been designed for installation in industrial
machinery. BA1N are according to the following standards and directives.
Standards
EN 60034-1 Rating and performance behavior
EN 60034-5 Type of protection
Directives
2006/95/EG Low voltage directive
The machine manufacturer must evaluate the electric and mechanic safety
as well as environmental influences in the assembled state of the machine
according to the Machine Directive 2006/42/EC and DIN EN 60204-1 (safety
of machines).
The electric installation must comply with the protection requirements of the
EMC Directive 2004/108/EC. The plant manufacturer is responsible for ap‐
propriate installation (for example: physical separation of signal and power
cables, using shielded cables, ...). The EMC instructions of the converter
manufacturer must be observed.
Start-up is prohibited as long as the conformity with these directives is de‐
clared.
2.3 Unintended use
Any use of the motors outside of the specified fields of application or under
operating conditions and technical data other than those specified in this doc‐
umentation is considered to be "inappropriate use".
Operation in hazardous areas (ATEX) and direct operation on the three-
phase network is forbidden.
2.4 Qualification of personnel
For the purpose of this manual, qualified personnel means persons who are
familiar with transporting, installing, mounting, commissioning and operating
the components of the electrical drive and control system and the associated
hazards and have an appropriate qualification for their job.
BA1N Kinetic Energy Buffer 3/49
Safety instructions
R911393267_Edition 01 Bosch Rexroth AG
To Next Page
Loading...
Need help?
General
