EasyManuals Logo

Bosch Rexroth BA1N User Manual

Bosch Rexroth BA1N
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Allowed classes of environmental conditions during transport and handling
acc. to DIN EN 60721-3-2
Classification type Allowed class
Classification of climatic environmental conditions 2K11
Classification of biological environmental conditions 2B1
Classification of chemically active materials 2C1
Classification of mechanically active materials 2S5
Classification of mechanical environmental conditions 2M4
Tab. 5-1: Allowed classes of environmental conditions during transport
For a better overview, some essential environmental influencing variables of
the previously mentioned classifications are listed. Unless otherwise speci‐
fied, the specified values are the values of the particular class. However,
Bosch Rexroth reserves the right to adjust these values at any time based on
future experiences or changed environmental factors.
Deviating from DIN EN 60721-3-2 permissible ambient conditions
Environmental factor Unit Value
Temperature °C
-25 ... +70
1)
Relative air humidity %
5 ... 75
1)
Absolute air humidity g/m³
1 ... 29
1)
1) Differs from DIN EN 60721-3-2
Tab. 5-2: Deviating permissible storage conditions
Before transport, empty the liquid coolant from the liquid-cooled
BA1N energy storage device to avoid frost damage.
5.3 Storage instructions
Storage conditions
Generally, Bosch Rexroth recommends storing all components until they are
actually installed in the machine as follows:
in their original packaging
at a dry and dust-free location
at room temperature
free from vibrations and oscillations
protected against light or direct sunlight
Upon delivery, protective sleeves and covers can be attached to the
BA1N energy storage device. They have to remain on the BA1N energy stor‐
age device for transport and storage. Do not remove these parts until shortly
before assembly.
Based on DIN EN 60721-3-1, the tables below specify classifications and lim‐
it values which are allowed for our products while they are stored. Refer to
the detailed description of the classifications to take all of the factors which
are specified in the particular classification into account.
16/49
Transport and storage
BA1N Kinetic Energy Buffer
Bosch Rexroth AG R911393267_Edition 01

Table of Contents

Other manuals for Bosch Rexroth BA1N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bosch Rexroth BA1N and is the answer not in the manual?

Bosch Rexroth BA1N Specifications

General IconGeneral
BrandBosch
ModelRexroth BA1N
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals