All persons, working on, with or near an electric facility, must know the safety
requirements, safety instructions and operating instructions (DIN EN
50110-1).
2.5 General safety instructions
Do not install or operate energy storage device or components of electric
drive and control systems, as long as you have not read all delivered docu‐
mentation.
Please observe the respectively valid national, local and plant-specific regula‐
tions, the safety notes in the documentation and the warning signs on the
components of the BA1N.
Improper use of the components and non-observance of the described safety
notes can lead to damage, bodily injury, electric shock or in extreme case
lead to death.
In the case of damage due to non-observance of the safety notes, Bosch
Rexroth assumes no liability.
2.6 Product- and technology-dependent safety instructions
2.6.1 Protection from electric voltage
Work required on the electric system may only be carried out by skilled elec‐
tricians. Tools for electricians (VDE tools) are absolutely necessary.
Before working:
1. Enable.
2. Secure against reactivation.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.
After completing the job, cancel the measures in reverse order.
Dangerous voltage occurs during operation! Danger to life, risk of injury by
electric shock!
● Before start-up, connect the protective conductors on all electric compo‐
nents according to the connection plan.
● Operation, even for short measuring purposes, is only allowed with fixed
connected protective conductor on the specified points of the compo‐
nents.
2.6.2 Protection against magnetic and electromagnetic fields
Magnetic and electromagnetic fields are created in the direct environment of
live conductors or permanent magnets of electro motors and are a serious
danger for persons.
Strong magnetic and electromagnetic fields pose a health hazard for persons
with heart pacemakers, metallic implants and hearing aids in the direct envi‐
ronment of motor components!
● Persons with heart pacemakers and metallic implants are not allowed to
approach or handle these motor components.
2.6.3 Protection against burns
Risk of injury due to hot surfaces!
4/49
Safety instructions
BA1N Kinetic Energy Buffer
Bosch Rexroth AG R911393267_Edition 01
To Next Page
Loading...
Need help?
General
