1 695 600 091 2012-11-16| Robert Bosch GmbH
Symbols used | WBE 4200 | 35
en
1. Symbols used
1.1 In the documentation
1.1.1 Warning notices - Structure and meaning
Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of
failure to observe action and information
given.
¶ Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Signal
word
Probability of
occurrence
Severity of danger if
instructions not observed
DANGER Immediate
impending
danger
Death
or severe injury
Possible impending
danger
Death
or severe injury
CAUTION Possible dangerous
situation
Minor
injury
1.1.2 Symbols in this documentation
Sym-
bol
Designation Explanation
!
Attention Warns about possible property damage.
i
Information Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible
intermediate result.
"
Final result There is a visible final result on
completion of the instruction.
1.2 On the product
!
Observe all warning notices on products and ensure
they remain legible!
Direction of wheel rotation
Wheel must turn in direction indicated.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
1.2.1 Product information
GOST Marking
¶ Certifies machine conformity for the
Russian market.
Identification plate
Machine model, 10 digit identification code; Voltage
(V), Frequency(Hz), Installed power (kW); Amperage
(A), Max. working pressure (kPa), Class of protection
(IP); Year of manufacture; CE Marking; 14 Digit code
and machine model; Bar code.
Power supply voltage
¶ Follow the indications given on the plate.
Balancing Start-Stop
¶ Located on the wheel protection indicates the
direction to activate/stop the flange rotation.
To Next Page
Loading...
Need help?
General
