Brother ADS-2100 User Manual

5-3
Confidential
1.3 Details of Maintenance Mode Functions
1.3.1 Change USB No. return value (End-user accessible maintenance mode only)
<Function>
When the operating system (OS) installed on the computer is Windows Vista
®
, and the
machine is connected to this computer using USB2.0FULL, the OS may not be able to obtain
the USB device serial number depending on the computer and the USB device. If the serial
number cannot be obtained, the number of devices increases each time the device is
connected to the computer. To avoid this problem, set this function to "USBNo.=ON" and fix
the USB No. return value to "0".
<Operation Procedure>
(1) In function number selection mode of end-user accessible maintenance mode, press the
[Scan to USB] button once. The Scan to USB LED lights.
(2) Press the [Stop] button.
When the Power LED lights for one second, it means that "return serial number of
machine" is set.
When the Error LED lights for one second, it means that "return 0" is set.
(3) When setting is completed, the machine returns to the ready state.
1.3.2 Initialize user setting
<Function>
This function is used to initialize the setting values for operation parameters, user switches,
and others registered in the EEPROM.
<Operation Procedure>
(1) In function number selection mode of maintenance mode, press the [Scan to USB]
button three times. The Scan to PC LED and the Scan to USB LED light.
(2) Press the [Stop] button. The EEPROM is initialized, and the machine returns to the
ready state.

Brother ADS-2100 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	256
Input color depth	30 bit
Maximum scan size	215.9 x 863 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	24 ppm
Enhanced scan resolution	1200 x 1200 DPI
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	48 ipm
Scanner type	Sheet-fed scanner
Product color	Black
Scan to	E-mail, File, Image, OCR, USB
Sensor type	CMOS dual CIS
Scan drivers	ISIS, TWAIN, WIA
Internal memory	256 MB
Scan file formats	JPG, PDF, TIFF
Processor frequency	400 MHz
Scanning noise level	62.5 dB
Daily duty cycle (max)	500 pages
Auto document feeder (ADF) input capacity	50 sheets
Minimum scan area (ADF)	51 x 70 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Scanning media types supported	Business Card, Plain paper, Plastic Card, Recycled paper, Thick paper, Thin paper, Business card, Plastic card
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 200 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Input voltage	220-240 V
Power supply type	AC
AC input frequency	50 Hz
Power consumption (off)	0.3 W
Power consumption (standby)	7 W
Power consumption (typical)	18 W
Power consumption (PowerSave)	1.5 W
Package weight	5400 g
Image formats supported	JPG, TIF
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	179 mm
Width	220 mm
Height	299 mm
Weight	3300 g