EasyManuals Logo

Brother ADS-2100 User Manual

Brother ADS-2100
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
4-3
Confidential
1.1.2 Writing firmware
(1) Press and hold the [Stop] and [Scan to PC] buttons simultaneously, and plug the AC
cord into the outlet. Check that the Power LED and the Error LED are lit, and release
these two buttons.
(2) Press the [Scan to PC] button, and then the [Stop] button. The Power LED and the Scan
to PC LED light, and the machine enters firmware writing mode.
(3) Connect the computer to the machine with the USB cable.
(4) Turn ON the power switch of the computer.
(5) Open the temporary folder and double-click "Filedg32.exe" to start it, and select the
"Brother Maintenance USB Printer".
(6) Drag and drop the firmware (LZXXXX_$.upd) in the same folder onto the "Brother
Maintenance USB Printer" icon. The firmware file is loaded to the machine, and writing
to the flash ROM starts.
(7) The LED flashes randomly during writing. When writing is completed, the machine
restarts and returns to the ready state automatically. Do not disconnect the USB cable or
turn OFF the power switch of the computer until writing is completed.
(8) Turn OFF the power switch of the machine, and disconnect the USB cable.

Table of Contents

Other manuals for Brother ADS-2100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother ADS-2100 and is the answer not in the manual?

Brother ADS-2100 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Grayscale levels256
Input color depth30 bit
Maximum scan size215.9 x 863 mm
Output color depth24 bit
ADF scan speed (b/w, A4)24 ppm
Enhanced scan resolution1200 x 1200 DPI
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (b/w, A4)48 ipm
Scanner typeSheet-fed scanner
Product colorBlack
Scan toE-mail, File, Image, OCR, USB
Sensor typeCMOS dual CIS
Scan driversISIS, TWAIN, WIA
Internal memory256 MB
Scan file formatsJPG, PDF, TIFF
Processor frequency400 MHz
Scanning noise level62.5 dB
Daily duty cycle (max)500 pages
Auto document feeder (ADF) input capacity50 sheets
Minimum scan area (ADF)51 x 70 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Scanning media types supportedBusiness Card, Plain paper, Plastic Card, Recycled paper, Thick paper, Thin paper, Business card, Plastic card
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 200 g/m²
USB version2.0
Standard interfacesUSB 2.0
Input voltage220-240 V
Power supply typeAC
AC input frequency50 Hz
Power consumption (off)0.3 W
Power consumption (standby)7 W
Power consumption (typical)18 W
Power consumption (PowerSave)1.5 W
Package weight5400 g
Image formats supportedJPG, TIF
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth179 mm
Width220 mm
Height299 mm
Weight3300 g

Related product manuals