[!I Using 8,000 stitch sewing mode
* By successively reading the
two
stitch patterns in 8,000 stitch sewing mode,
it
is possible
to
sew up
to
8,000 stit-
ches.
(1)
Set the
DIP
SW@
No.2
to
ON.
This will enter 8,000 stitch sewing mode.
(Refer to page
26,
"DIP SWITCH SETTINGS".)
(2)
While pressing the
EMERGENCY
STOP
switch, turn on the power, then release the
EMERGENCY
STOP
switch.
The stitch pattern stored in the machine
will
be
erased.
(3)
Input
two
stitch patterns successively.
(4)
When stepping on the starting switch, the second stitch pattern input will be sewn directly after the first input
stitch pattern.
00
Using single split mode
* By using single split mode,
it
is possible
to
change
up
to
9 patterns immediately.
(1)
Set the
DIP
SW @
No.1
to
ON. This
will
enter single split mode.
{Refer to page
26,
"DIP SWITCH SETTINGS".)
(2)
Turn on the power,
input
the pattern programmed
with
split sewing.
"1"
will
be
displayed on the
PRO.
NO.
display. When pressing the program select switch, the program numbers
will
be
displayed in order.
(Ex) When the three patterns are programmed
with
split sewing, the display switches
1,
2,
3,
1,
2 ... in
that
order.
(3)
When stepping on the starting
switch~
only the pattern displayed on the
PRO.
NO. display can be sewn.
* When reading
new
stitch patterns
into
the machine
from
the
floppy
disk, press the program select switch
while
pressing the step back switch.
(The
PRO.
NO. display switches
from
1,
2 ...
to
9,
0.)
Pressing the
R/W
switch and the displayed stitch pattern
will
be
newly
read
into
the machine.
-9-
To Next Page
Loading...
Need help?
General
