Brother BAS-311A User Manual

START
Power switch on -
Insert floppy
disk -
Press the PRO No. switch. -
Press the R/W switch. - - Reads program from disk.
-
Set the work piece.
Depress presser
lifter pedal. - -Work clamp descends.
Test
switch on- -Test lamp illuminates.
Depress starting pedal -
Depress starting pedal -
- Presser foot stops at sewing
start position.
-Feed drive (pulse motor)
(confirm
needle descent.
presser
foot and work clamp
operation.)
-Feed stop
Test
switch off- -Test lamp goes out.
Depress starting pedal - - Machine, feed operate.
} Max.
2.000 spm.
-
Stop--thread cutting
I
Work clamp rises
r
One machine cycle com-
pleted
I
-25-
To change pattern
Power switch on -
Press the
PRO No. switch -
Select the program
number.
Press the
R/W switch.- -Read program from disk.
Press the presser lifter pedal -
(if the work
clamp is down).
Depress presser
lifter pedal. -
-Work clamp rises.
3SC Replace presser foot. feed
plate; confirm
needle
descent.
3SC Set material in place.
When thread breaks or
bobbin thread runs out
Press emergency stop -
swtich.
Press emergency stop -
switch.
Press step back switch. -
- Machine stops. alarm
sounds.
-*Remove problem
-Thread cutter operates.
alarm stops.
- Work
clamp moves one
stitch at a time
in reverse
direction.
Press step back
switch. - - Work clamp stops.
From the library of: Superior Sewing Machine & Supply LLC

Brother BAS-311A Specifications

General

Brand	Brother
Model	BAS-311A
Category	Sewing Machine
Language	English