BE-1204B-BC • BE-1206B-BC 9
Procedure of Reading This Manual
Explanation of models
This manual explains two models:
- BE-0901E-AC-PC
- BE-1201B-AC-PC
Explanation for individual model is provided by identifying the model name. Check the model before
using the machine. The display is BE-0901E-AC-PC.
Configuration of this manual
This manual consists of the following chapters:
Chapter 1 An Introduction of Embroidery Machine
Provides information on the specifications of the embroidery machine, software installation
environment, and basic software operations.
Chapter 2 Preparation of Embroidery Machine
Describes machine installation and preparation to be conducted before starting embroidering
operation.
Chapter 3 Embroidering Procedures
Provides explanations on the operation panel and briefly reviews the flow of embroidering
processes.
Chapter 4 Selecting and Transferring Embroidery Data
Explains how to use the Embroidery Data Explorer.
Chapter 5 Editing Embroidery Data
Explains how to use the Embroidery Data Editor.
Chapter 6 Embroidering
Explains how to use the Machine Controller.
Chapter 7 Operation of Machine
Provides information on machine operation during embroidering.
Chapter 8 Creating Production Report
Explains how to use the production report program.
Chapter 9 Maintenance
Describes appropriate maintenance of the machine.
Chapter 10 Adjustment
Explains how to adjust the needles.
Chapter 11 List of Error Codes
Provides information on error codes and action to be taken.
Chapter 12 Troubleshooting
Provides troubleshooting for the machine.
Chapter 13 Connection and Installation of Optional Equipment
Describes connections between the machine/computer and optional equipment available.
To Next Page
Loading...
Need help?
General
