BE-0901E-AC-PC• BE-1201B-AC-PC 6-37
Chapter 6 Embroidering
2. Click [OK] when the items are set.
W1132Q
Adjust
Adjustment value of the needle is set.
! The adjustment value is set at the increment of 0.1 mm.
! The setting range is -0.5 ~ 2 mm in X and Y directions.
! If the adjustment value is set too large, a pattern may be disfigured.
! For sewing to be close to a hoop, if the adjustment value is set too large, “Area Over” may occur
while sewing and the operation may stop.
1. Select [Adjust] from Settings menu.
W1737
2. When setting is complete, click [OK].
W1134Q
Cannot be set.
To Next Page
Loading...
Need help?
General
