Brother DCP-8065DN - PS PCB Unit

Confidential
5-104
5.1.84 PS PCB Unit
(1) Turn the machine upside down.
(2) Remove the five bind B M4x12 Taptite screws.
(3) Remove the cup S M3x6 Taptite screw. (for the models with the NCU only)
(4) Lift up the Base plate LV to the direction of the arrow.
(5) Remove the Screw pan (S/P washer) M3.5x6 from the Base plate LV to remove the PS PCB
unit terminal.
Fig. 5-158
Taptite, bind B M4x12
Taptite, bind B M4x12
Screw pan (S/P washer) M3.5x6
PS PCB unit terminal
Base plate LV
<Back side>
Taptite, cup S M3x6
4
N
CU FG harmess