EasyManuals Logo
Home>Brother>All in One Printer>DCP-8065DN

Brother DCP-8065DN Service Manual

Brother DCP-8065DN
492 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #345 background imageLoading...
Page #345 background image
Confidential
9-22
9.2.4.3 Malfunction
When taking countermeasures for malfunctions as described in this section, check connectors for
contact failure before measuring the voltage at the specified connector pins.
(1) No AC power supplied
Possible cause
Step
Check
Result
Remedy
Supply
voltage
1 Is the correct voltage
present at the outlet?
No Inform the user that the correct
voltage is not supplied at the
outlet.
Power plug 2 Is the power cord securely
plugged into the outlet?
No Plug the power cord securely
into the outlet.
Fuse (F1, F2) 3 Is the fuse blown? Yes If the fuse blows again
immediately after replacing the
low-voltage power supply PCB,
check that there is not a short
circuit somewhere in the AC
power supply line.
Wiring 4 Unplug the power supply
plug. Is there a broken
wire between the AC input
connector of the low-
voltage power supply and
the power plug?
Yes Replace the AC power cord.
(2) No DC power supplied
Possible cause
Step
Check
Result
Remedy
AC power
supply
1 Is AC power supplied
between terminals LIVE
and NEUTRAL when the
power plug is plugged into
the outlet?
No Follow the same check
procedure of (1) “No AC power
supplied”.
Wiring, DC
load
2 Turn on the power switch.
Measure the voltages
between the terminals. Do
the measured voltage
satisfy the prescribed
valued in the table below?
Yes Turn off the power switch,
reconnect the connector and turn
the power switch on again. If
the protector circuit is activated,
check the connector, the wiring
from the connector, and the DC
load.
Low-voltage
power supply
PCB
3 Refer to the chart * 1
below.
No Replace the low-voltage power
supply PCB.
*1
PCB +lead pin - lead pin Voltage
Main CN5-4
CN5-6
CN5-7
CN5-2
CN5-8
CN5-8
Approx. 24V
Approx. 8V
Approx. 3.3V

Table of Contents

Other manuals for Brother DCP-8065DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-8065DN and is the answer not in the manual?

Brother DCP-8065DN Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Scan toe-mail, file, image, OCR
Input color depth48 bit
Copier resize25 - 400 %
Maximum copy resolution1200 x 600 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)28 cpm
Total input capacity250 sheets
Total output capacity150 sheets
Auto document feeder (ADF) input capacity50 sheets
Internal memory32 MB
Maximum internal memory544 MB
Sound power level (standby)30 dB
Sound pressure level (printing)55 dB
DisplayLCD
Market positioningBusiness
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Font styles66 Scaleable fonts, Letter, Gothic 16.66, OCR-A, OCR-B, 11 Barcodes
Dimensions (WxDxH)531 x 450 x 475 mm
Networking features10/100 Base-TX
All-in-one functionsCopy, Scan
Color all-in-one functionsscan, n
Compatible operating systemsMac OS X 10.2.4 or greater Windows XP
Standard interfacesUSB 2.0
Sustainability certificatesENERGY STAR
Power consumption (standby)85 W
Power consumption (PowerSave)15 W
Power consumption (average operating)660 W

Related product manuals