Brother FAX-575 User Manual

Setup Send
6 - 11
Setting up Polled Transmit
Polled Transmit is when you set up the fax machine to wait with a
document so another fax machine can call and retrieve it.
1
Insert the document face down in the ADF.
2
Press Menu/Set, 3, 8.
3
Press ▲ or ▼ to choose ON (or
OFF).
Press Menu/Set.
4
Press 1 if you want to leave the
document in the ADF.
—OR—
Press 2 to scan the document into the memory.
5
Press 1 if you want to choose more settings and the LCD will
return to the SETUP SEND menu.
—OR—
Press 2 if you have finished choosing settings, and go to
Step 6.
6
Press Fax Start.
■ If you pressed 1 in Step 4, the document remains in the
ADF until your fax machine is polled. If you must use your
fax machine before the polled Transmit occur, you can
“interrupt” it to send another fax. (See Interrupting Delayed
Fax and Polled Transmit jobs on page 6-13.) The
document in the ADF can only be polled once.
■ If you pressed 2 in Step 4, the document will be stored in
the memory and can be retrieved from any other fax
machine until you delete the fax in memory by using the
Canceling a Job menu setting.
8.POLLED TX
POLLED TX:ON?
1.DOC 2.MEMORY

Brother FAX-575 Specifications

General

Group dial	4
Modem speed	9.6 Kbit/s
Color faxing	No
Auto-redialing	Yes
Fax resolution	203 x 392 DPI
Print technology	Thermal
Fax coding methods	MH
Fax transmission speed	15 sec/page
Fax speed dialing (max numbers)	100
Interface	TAD
Weight (imperial)	5.5 lbs
Power requirements	AC, 120 V 50/60Hz
Package weight (imperial)	7 lbs
Copy resolution (black text)	400 x 400 DPI
Package dimensions (W x D x H)	15 x 10.7 x 7.5 \
Standard input capacity	50 sheets
Auto document feeder (ADF) input capacity	10 sheets
Copier resize	50 - 150 %
Grayscale levels	64
Maximum number of copies	99 copies
Scan speed	14 sec/page
Fax memory	0.5 MB
Power consumption (standby)	5 W
Power consumption (typical)	170 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	302 x 267 x 340 mm