Brother FAX-575 User Manual

8 - 4
Remote Fax Options
Remote Retrieval
You can call your fax machine from any touch tone telephone or fax
machine, then use the Remote Access Code and remote
commands to retrieve fax messages. Be sure to cut out the
Remote Retrieval Access Card on the last page and keep it with
you at all times.
Using your remote access code
1
Dial the fax number from a telephone or another fax machine
using touch tone.
2
When the fax machine answers, immediately enter your
Remote Access Code (3 digits followed by ).
3
The fax machine signals if it has received fax messages:
1 long beep — Fax messages
No beeps — No fax messages
4
The fax machine gives two short beeps, which tells you to
enter a command. The fax machine will hang up if you wait
longer than 30 seconds to enter a command. The fax machine
will beep three times, if you enter an invalid command.
5
Press 90 to reset the fax machine when you’ve finished.
6
Hang up.

Brother FAX-575 Specifications

General

Group dial	4
Modem speed	9.6 Kbit/s
Color faxing	No
Auto-redialing	Yes
Fax resolution	203 x 392 DPI
Print technology	Thermal
Fax coding methods	MH
Fax transmission speed	15 sec/page
Fax speed dialing (max numbers)	100
Interface	TAD
Weight (imperial)	5.5 lbs
Power requirements	AC, 120 V 50/60Hz
Package weight (imperial)	7 lbs
Copy resolution (black text)	400 x 400 DPI
Package dimensions (W x D x H)	15 x 10.7 x 7.5 \
Standard input capacity	50 sheets
Auto document feeder (ADF) input capacity	10 sheets
Copier resize	50 - 150 %
Grayscale levels	64
Maximum number of copies	99 copies
Scan speed	14 sec/page
Fax memory	0.5 MB
Power consumption (standby)	5 W
Power consumption (typical)	170 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	302 x 267 x 340 mm