Brother FAX-575 User Manual

9 - 2
Printing reports
Printing reports
Following reports are available:
How to print a report
1
Make sure that there is no document in the ADF.
2
Press Copy/Reports, then enter the number (see list above)
of the report you want to print. For example, press 6 to print
the USER SETTINGS.
Prints a Transmission Verification
Reports for the last fax that was sent.
This information will remain until you
pick up the handset.
Prints the Help List so you can see
at-a-glance how to quickly program your
fax machine.
Lists names and numbers stored in
One-Touch and Speed-Dial memory, in
numerical order.
Lists information about the last incoming
and outgoing faxes. (TX means
Transmit.) (RX means Receive.)
Quick-Dial list (above), alphabetically.
Lists your settings.
Lists summary information and amount
of occupied memory.
1.TRANSMISSION
2.HELP LIST
3.QUICK-DIAL
4.FAX JOURNAL
5.TEL.INDEX
6.USER SETTINGS
7.MEMORY STATUS

Brother FAX-575 Specifications

General

Group dial	4
Modem speed	9.6 Kbit/s
Color faxing	No
Auto-redialing	Yes
Fax resolution	203 x 392 DPI
Print technology	Thermal
Fax coding methods	MH
Fax transmission speed	15 sec/page
Fax speed dialing (max numbers)	100
Interface	TAD
Weight (imperial)	5.5 lbs
Power requirements	AC, 120 V 50/60Hz
Package weight (imperial)	7 lbs
Copy resolution (black text)	400 x 400 DPI
Package dimensions (W x D x H)	15 x 10.7 x 7.5 \
Standard input capacity	50 sheets
Auto document feeder (ADF) input capacity	10 sheets
Copier resize	50 - 150 %
Grayscale levels	64
Maximum number of copies	99 copies
Scan speed	14 sec/page
Fax memory	0.5 MB
Power consumption (standby)	5 W
Power consumption (typical)	170 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	302 x 267 x 340 mm