Brother FAX-575 User Manual

Making copies
10 - 1
Using the fax machine as a copier
You can use this fax machine as a copier. Always make sure you
have paper in the paper tray before making copies.
Copy operations
To make a single copy that is not reduced, enlarged or sorted, you
only have to press one key. Remember, your fax machine cannot
scan anything closer than 1/6 in. (4 mm) from the edge of the
paper.
Making a single copy
1
Insert the document face down in the ADF.
2
Press Copy/Reports twice.
To cancel, press Stop/Exit.
Do NOT pull on the paper while copying is in progress.
10
Making copies
Incoming faxes cannot be received on paper or into the
memory while the fax machine is copying.
The default resolution for a single copy is S.FINE. Set the
resolution to PHOTO for photographs by using the Resolution
key.
Copy Key
Not
Scannable
area
1/6" (4 mm)
1/8" (3 mm)
1/6" (4 mm)
1/6" (4 mm)

Brother FAX-575 Specifications

General

Group dial	4
Modem speed	9.6 Kbit/s
Color faxing	No
Auto-redialing	Yes
Fax resolution	203 x 392 DPI
Print technology	Thermal
Fax coding methods	MH
Fax transmission speed	15 sec/page
Fax speed dialing (max numbers)	100
Interface	TAD
Weight (imperial)	5.5 lbs
Power requirements	AC, 120 V 50/60Hz
Package weight (imperial)	7 lbs
Copy resolution (black text)	400 x 400 DPI
Package dimensions (W x D x H)	15 x 10.7 x 7.5 \
Standard input capacity	50 sheets
Auto document feeder (ADF) input capacity	10 sheets
Copier resize	50 - 150 %
Grayscale levels	64
Maximum number of copies	99 copies
Scan speed	14 sec/page
Fax memory	0.5 MB
Power consumption (standby)	5 W
Power consumption (typical)	170 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Dimensions (WxDxH)	302 x 267 x 340 mm