3. Getting Started
GT-3 Series
3-1. Placing Your Printer
Uncrate and Setting the printer by following the steps in Uncrate Manual, which is packed with the printer. Locate
your printer taking the following into account.
Environmental conditions are suitable.
Avoid direct sunlight, dust and extremes of humidity.
Never use an extension cable.
A working space must be left around the printer.
Minimum space of 100 cm (39.4 inch) on the front and the right. Keep away from the right side of the
Exhaust Fan at least by 20 cm (7.9 inch).
Body size is app. 137 cm (53.9 inch) x 104.5 cm (41.1 inch) x 66 cm (26.0 inch) and weighs app. 111 kg
(245 lb).
The table that supports the printer should be at least 137 cm (53.9 inch) in width and 104.5 cm (41.1
inch) in depth, and should be able to bear a weight of 150 kg (330 lb) or more. Its tabletop must be level.
Unit:cm
0051Y
To Next Page
Loading...
Need help?
General
