3. Getting Started
GT-3 Series
3-3-5. Installation of PC for Windows Vista / Windows 7 / Windows 8 (32 bit / 64 bit)
Refer first to "3-3-2. PC preparation: For Windows XP (32 bit)" and confirm the process. Install the file Output
Printer Driver "Brother GT-3 FileOutput" first to your PC. Tools and manuals are installed together from Install CD,
and PC must be restarted. Then PC is connected to USB 2.0 cable, the printer turned ON, and USB 2.0 cable
connected to the printer. Connect with USB 2.0 Cable first and then connect to the LAN by following the steps in
this Instruction Manual.
Install File Output Printer Driver "Brother GT-3 FileOutput" first to your PC
Do not connect the printer to the PC at this stage.
<Note>
You must be logged on with Administrator rights on the PC.
(1) Turn on your PC.
(2) Close all open applications
(3) Insert the Install CD (included) to your PC.
Open the CD-ROM drive and double-click "Setup.exe".
(4) The monitor turns dark and the following dialog appears when User Account Control is ON. Select "Continue".
(5) The Installer starts installation. Follow the indications of the dialogs.
To Next Page
Loading...
Need help?
General
