216
Precautions to keep good printing quality/use printer over the long term
7-4-3. Firing adjustment
Because the ejection timing varies depending on the platen's height and properties of each print head, this function is
provided to adjust the ejection timing for each print head when any print head is replaced with a new one or after the
completion of the setup procedure, for instance. If you are making adjustments after replacing a print head, this task
should be carried out after configuring the V-rating settings.
(1) Make several sheets of A4-size or letter-size paper (black paper or transparent sheet such as OHP sheet, and
white paper) available for use.
(2) Make sure that a connection of USB 2.0 cable or LAN cable is made between the printer and your PC.
(3) On the PC, from [All Programs] in the Start menu, select the "GTX-4 Maintenance" from "Brother GTX-4 Tools".
(4) After the window shown below appears, select [Firing Adjustment] and click [Next].
(5) Perform the required operation by following the on-screen instructions in the dialog box.
After the adjustment is completed, the currently displayed screen will go back to the window mentioned above.
To Next Page
Loading...
Need help?
General
