USING THE WINDOWS
®
-BASED BROTHER MFL-PRO CONTROL CENTER
15 - 2
How to Turn Off AutoLoad
1
Left-click the Control Center icon, and then click Show.
2
When the Control Center icon appears, left-click the Smart Click Control
Center button. A dialogue box with a check box labeled “AutoLoad Pop-up”
will appear:
3
Uncheck the AutoLoad Pop-Up option.
Using the Scan Keys
You can use the Scan keys on the control
panel to scan originals into your word
processing, graphics or E-mail applications.
The advantage of using the Scan keys is that
you avoid the mouse clicks required to scan
from your PC.
Using the Control Panel Keys
Before you can use the Scan keys on the control panel, you must have connected
the MFC to your Windows
®
-based PC and loaded the appropriate Brother
Drivers for your version of Windows
®
. When you are ready to use the Scan
keys, make sure the Brother Control Center application is running on your PC.
(For details about how to configure the Brother Control Center buttons to launch
the application of your choice using the Scan keys, see
Brother Control Center
Features
, Page 15-4 to15-6.)
If you have connected a Macintosh, the control panel keys will not work with
your computer.
To Next Page
Loading...
Need help?
General
