USING SCANSOFT™ PAPERPORT
®
FOR BROTHER AND SCANSOFT™ TEXTBRIDGE
®
16 - 5
Scanning a Document into Your PC
1
Insert document(s) face down in the document feeder of the machine.
2
Adjust the following settings, if needed, in the Scanner Setup window:
• Resolution
• Gray Scale (Black & White, Gray [Error Diffusion], True Gray)
• Brightness
• Contrast
• Size
3
Select the Start button from the Scanner window.
When scanning is completed, close the scanner window. The PaperPort
®
screen
will appear showing the image you scanned highlighted in red.
Settings in the Scanner Window
Image
Resolution
Resolution: Select the scanning resolution from the Resolution drop down list.
Higher resolutions take more memory and transfer time, but can achieve a finer
scanned image.
Gray Scale
Gray Scale: Set the image Type to Black & White for text or line art. For
photographic images, set the image type to Gray (Error Diffusion) or True Gray.
Gray (Error Diffusion) is used for documents that contain photographic images
or graphics. (Error Diffusion is a method for creating simulated gray images by
placing black dots in a specific matrix instead of true gray dots.)
256 True Gray mode is used for documents containing photographic images or
graphics. This mode requires the most memory and longest transfer time.
Brightness
Brightness: Adjusting the brightness settings to obtain the best image. The
Brother Multi-Function Link
®
Pro offers 100 brightness settings (-50 to 50).
The default value is 0, representing an “average” setting.
You can set the brightness level by dragging the slidebar to the right to lighten
the image or to the left to darken the image. You can also type a value in the
box to set the settings.
If the scanned image is too light, set a lower brightness value and scan the
document again.
If the image is too dark, set a higher brightness value and scan the document
again.
When the setting is True Gray, 200 × 100 dpi and 200 × 400 dpi is not available.
To Next Page
Loading...
Need help?
General
