Difficulties Suggestions
• Condensed print
• Horizontal streaks
• Top and bottom sentences are cut
off
• Missing lines
This is usually caused by a poor telephone connection. Make a copy; if your
copy looks good, you probably had a bad connection, with static or
interference on the telephone line. Ask the other party to send the fax again.
Vertical black lines when receiving The corona wire for printing may be dirty.
Clean the corona wire in the drum unit.
The sender’s scanner may be dirty. Ask the sender to make a copy to see if
the problem is with the sending machine. Try receiving from another fax
machine.
Received faxes appear as split or
blank pages.
Left and right margins are cut off or a single page is printed on two pages.
Turn on Auto Reduction.
Related Information
• Troubleshooting
• Set Dial Tone Detection
• Set Telephone Line Compatibility for Interference and VoIP Systems
• Clean the Scanner
• Set the Number of Rings Before the Machine Answers (Ring Delay)
• Choose the Correct Receive Mode
481
To Next Page
Loading...
Need help?
General
