Setting Items for Photo Printing Using Operation Panel
You can specify the setting of page size, media type, photo fix and so on to print the photos saved on the
USB flash drive.
Print Settings Screen
The following screen is displayed by selecting Settings.
Setting Items
Flick vertically to display setting items and select the setting item to display the settings. Select to specify
the setting.
Note
• Some settings cannot be specified in combination with the other setting items or the print menus. If
the setting which cannot be specified in combination is selected, and Error details are displayed
on the touch screen. In this case, select on the upper left on the touch screen to check the
message and change the setting.
• The settings of the page size, media type, etc. are retained even if another print menu is selected or
the printer is turned off.
You can specify the following setting items.
• Paper src
Select a paper source (Rear tray/Cassette 1/Cassette 2/Auto) where paper is loaded.
Note
• When Auto is selected, paper is fed from the paper source where the paper that matches the
paper settings (page size and media type) is loaded.
• Page size
Select the page size of the loaded paper.
• Type (Media type)
Select the media type of the loaded paper.
• Print qlty (Print quality)
262
To Next Page
Loading...
Need help?
General
