Canon GX7000 Series User Manual

Reconfiguration Method of LAN Connection/Reconfiguration
Method of Wi-Fi Connection
Reconfiguration Method of LAN Connection
Reconfiguration Method of Wi-Fi Connection
Reconfiguration Method of LAN Connection
Follow either procedure below to change LAN connection method (wired or Wi-Fi).
• For Windows:
◦ Click here and redo setup.
◦ Enable Wi-Fi or wired LAN on the operation panel of the printer. After that, perform settings on the
Network Settings screen on IJ Network Device Setup Utility.
For details, refer to Performing/Changing Wi-Fi Settings or Performing/Changing Wired LAN
Connection (Ethernet Cable) Settings.
• For macOS:
◦ Click here and redo setup.
Reconfiguration Method of Wi-Fi Connection
Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct).
• For Windows:
◦ See Changing the Connection Mode.
◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
Important
Before you perform settings using IJ Network Device Setup Utility, turn on Easy WL connect
mode on the printer following the procedure below.
1.
Check that printer is turned on.
2. Press and hold (Wireless connect) button for 3 seconds.
Using Touch Screen
3. Perform operations following instructions on your computer, smartphone/
tablet.
4.
If message saying setup is completed appears, select OK.
• For macOS:
See Changing the Connection Mode.
47

Canon GX7000 Series Specifications

General

Brand	Canon
Model	GX7000 Series
Category	Printer
Language	English