Wi-Fi Connection Assistant
Wi-Fi Connection Assistant allows you to diagnose or repair the network status, and to perform printer
settings on network.
Use Wi-Fi Connection Assistant for:
• Searching printers on network and performing initial network setup for detected printers
• Performing initial network setup by connecting the printer and computer using a USB cable (Not
available for some models)
• Changing printer network settings
• Diagnosing the settings of the printer and those of computer on which Wi-Fi Connection Assistant is
installed if anything is wrong with connection. In addition, Wi-Fi Connection Assistant repairs the status
of the printer and computer (Not available for some models).
Important
• Depending on the printer you are using, an administrator password is already specified for the printer•
at the time of purchase. When you change the network settings, authentication by the administrator
password is required.
For details:
Administrator Password
For improving security, we recommend to change the administrator password.
Change Administrator Password
• To use the printer over LAN, make sure you have the equipment necessary for the connection type,
such as a wireless router or a LAN cable.
• When you install Wi-Fi Connection Assistant, disable block function of firewall.
• Do not change network settings using Wi-Fi Connection Assistant while printing is in progress.
59
To Next Page
Loading...
Need help?
General
