122
Creating a Start-up Image
You can create a start-up image using a still image on the memory card.
1. Select a still image with the CARD +/– buttons.
2. Open the menu and select [MY CAMERA].
3. Select [CREATE START-UP IMAGE].
[SET THIS AS START-UP IMAGE?], [YES] and [NO] appears.
4. Select [YES].
[OVERWRITE MY IMAGE?], [NO] and [YES] appears.
5. Select [YES].
The still image will be saved, and the image that was saved to [MY IMAGE] is erased.
Retain the original data of the still image you have set as the start-up image on
your computer or removable disk.
To Next Page
Loading...
